Concrete Safe De-Icer
Rock salt does not just melt the ice. It works its way into the slab.

Frequently Asked Questions
Concrete is a porous material, meaning that it absorbs water and other liquids easily. This is often observed during a rainy day when the falling raindrops penetrate the surface of the concrete instead of resting on its surface or bouncing off it. This becomes more of a problem, however, during colder months, especially when the temperature regularly dips below freezing. This produces what is known as the 'freeze-thaw effect', which can seriously damage concrete. As water is absorbed into the concrete during temperatures that are above zero degrees C, it stays there as it is too cold for it to evaporate away. When the temperature goes below zero, the water freezes, taking up extra space as a solid and ends up cracking or splintering the surrounding concrete. When the ice melts back into the water, it runs off, widening the cracks and going deeper into the concrete for the cycle to start all over again when the temperature lowers once more.
EcoGrit is one of the safest options on concrete. It is made from all natural products, it contains no rock salt and no urea, and it does not leave behind the residue that splits and splinters a concrete surface over a winter. It is biodegradable, so granules dissolved in the melt water do not harm the ground or the wildlife around it.
As well as applying a concrete safe ice melt to melt ice and snow safely before it penetrates too deeply underneath the surface, there are other ways to help prevent it from cracking, splintering or breaking under the strain of colder temperatures and wetter conditions. In areas where the concrete is freshly laid, or particularly vulnerable, laying an insulating frost blanket over it during especially cold nights can help. Pay attention to more fragile areas, such as the sides of slabs, any existing cracks and places where the concrete is wearing thin.
It makes an existing problem worse. Rock salt draws in additional moisture and weakens whatever concrete it touches. Salt dissolved in the melt water soaks in just as the water does and stays there, so the contact time lengthens and so does the damage. Other de-icers sold for the job carry their own harmful ingredients and are no better. On steps, ramps and slopes the extra cracking is a trip risk in itself, and broken pieces of concrete get lodged in shoe soles and carried indoors onto carpet, or caught in a pet's paw. They also fly up when struck at the wrong angle and mark passing vehicles.
Moisture from rock salt makes the freeze and thaw cycle worse. Water is drawn into the concrete, freezes, expands and cracks it from the inside, then thaws and carries the salt out into the surrounding ground. On a reinforced structure it goes further than that, because rock salt reaching the steel corrodes it, and that is what turns a surface problem into a structural one. EcoGrit contains no rock salt, so it adds to neither process.
You can, and it will clear the ice. It will also pull moisture into the surface, make the cracking that comes with freezing and thawing worse, and leave a corrosive residue behind. On a reinforced deck that matters far more than on a garden path, because rock salt carried down to the reinforcement is what causes the repairs that close a car park. EcoGrit contains no rock salt and is the safer choice on concrete.
Deicers lower the point at which water freezes by changing its chemical make-up. It creates a solution that does not freeze at the same point as water, thus melting the solid water and turning it back into liquid. As the solution spreads across the frozen surface, it melts the water underneath. This runs safely off the surface, removing the slippery coating and making it safer to walk or drive on. This is how EcoGrit works, amongst others.



